Hey, thanks. I think for sure I need to get my K2 properly aligned using spectogram. I have the DSP module installed and, while it works well for me on CW, it doesn't seem to be as helpful/effective on SSB. When I built the K2 and the DSP unit, I just followed the basic alignment procedures in the constuction manual.
- Paul, N6LQ On Friday 23 September 2005 20:03, you wrote: > Hi Paul, > I get excellent reports on my audio on both qrp and qro on ssb. reports like > "your audio sounds like fm" and wow, you audio is excellent". running 5 > watts ssb I was 30 over in Mexico from Bakersfield, Ca. on 75 meters. I > chase dx and ragchew with great results. In fact I sold my ts570DG as the > k2/100 became my favorite radio to operate. with the kdsp2 dsp, it is top > flight. > My antenna is a EDZ for 20 meters used on 80-10 meters and a cushcraft mav6 > 20-6 meters. > > Reggie k6xr in Southwest Bakersfield, CA. > > > > > From: Paul Clay <[EMAIL PROTECTED]> > >To: [email protected] > >Subject: [Elecraft] Current Performance of K2/100 on SSB? > >Date: Fri, 23 Sep 2005 19:56:35 -0700 > > > >This is NOT a troll. I'd like some feedback on > >groupmembers' satisfaction with the K2/100 on > >SSB, not for contesting but for DX and > >ragchewing. I like using my K2 for QRP CW work, > >but would like to start working SSB with a good > >quality audio signal. I'm trying to decide > >whether to go with the latest revision KPA 100 (I > >haven't had much luck with my limited tries of > >QRP SSB - and my signals so week on SSB I haven't > >really been able to get reliable feedback on my > >K2s tx audio), or to buy a used transceiver for > >SSB work (say, an Icom 751A). > > > >Thanks in advance for your thoughts. > > > >- Paul > > N6LQ, K2 SER 3640 > >_______________________________________________ > >Elecraft mailing list > >Post to: [email protected] > >You must be a subscriber to post to the list. > >Subscriber Info (Addr. Change, sub, unsub etc.): > > http://mailman.qth.net/mailman/listinfo/elecraft > > > >Help: http://mailman.qth.net/subscribers.htm > >Elecraft web page: http://www.elecraft.com > > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
