After parameter initialization you will need to perform the configuration steps starting on page 46 and calibration steps starting on page 49 of the Owner's manual and review the menu entries starting on page 52 to enable options (such as your K144XV). Also consult the installation manuals for the options you have installed (KBPF3, etc) for their enable procedure. Often it's obvious how to enable "optional modules" from the list of K3 menu entries described on page 52.
You'll need to know what crystal filters you have physically installed in each slot and the offsets of any 5-pole filters. This is the sort of information that might have been restored if you had a saved configuration file. 73 de Dick, K6KR -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Rudi Sent: Wednesday, December 26, 2012 1:59 AM To: [email protected] Subject: [Elecraft] Problem Firmware and K3 Hello FM, I did a hard reset: push shift and power on. After I was successful to upload the K3 firmware now, the dsp1 loaded up. But have following problems. Strange noise when I start up the K3. On bands 24/28/50 I have error PL1 The Main and Config menu are not the same as described in the manual. Several options that are installed are not activated like my XV144, general RX, etc.... What will I find next ? I think I need a configuration file, didn't save mine ;(( Info to solve the problem is welcome Best 73 - Rudi - ON7CL ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
