Mike,
Is the problem restricted to receive? If so (and if you have the K160RX
installed), check to see if the RXANT menu is set to ON.
The other possibility is that you have either the K60XV option or the
Rework Eliminators installed and you have the K2 secondary menu
parameter for D19 set to "n". If you do not have either of those
conditions, it must be set to "n", but if either of those conditions are
in place, it must be set to "y".
73,
Don W3FPR
On 12/26/2012 2:23 PM, Mike Baird wrote:
My trusty K2 (#5767) has just started acting up. It seems to be fine on all
bands but 40M. On that band, the RX seems dead, and won't tune properly
with my KAT500. It doesn't have the built in tuner. The 100W amp is built
in. Other bands show full output and normal RX. Using my other radios have
ruled out any antenna problem.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
