C62 is correct, and the path is intact. Reflowed the solder on all connections just to be sure. U4 readings are as follows Pin1 = 0.111 Pin2 = 0.339 Pin3 = 0.006 Pin4 = 2.363 Pin5 = 4.99 Pin6 = 4.99 Pin7 = 4.99 Pin8 = 4.99 Pin9 = 0.001 Pin10 = 0.001 Pin11 = 0.000 Pin12 = 0.000 Pin13 = 5.029 Pin14 = 5.029 Pin15 = 5.029 Pin16 = 5.029
Pins 1, 2, 7, 8, 12, and 13 are not within the specs in the manual. Is this a bad U4, or should I start tracing backwards? -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-VCO-Alignment-only-0-02V-R30-tp7569523p7569548.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
