good evening everyone, and thank you Don, thank you for the information so I will build it as in the manual
a short video for the first cry of K2 # 7369 ==>: Http://dl.free.fr/daj5O8QaD 73 , Chris F8ACF-56 ________________________________ De : Don Wilhelm <[email protected]> À : Christophe F8ACF-56 <[email protected]> Cc : "[email protected]" <[email protected]> Envoyé le : Jeudi 21 février 2013 21h08 Objet : Re: [Elecraft] K2 RF probe Chris, The diagram on page 46 is for what is commonly referred to as the "internal counter probe" Yes, the Probe package contains other parts for constructing an RF Probe (see page 9 of Appendix E for a schematic). There are no instructions for constructing the RF Probe, but it is almost self explanatory. Yes, the circuit traces for the RF Probe is built onto the back of the "Switch Spacing Tool" 73, Don W3FPR On 2/20/2013 4:03 PM, Christophe F8ACF-56 wrote: > Good evening to all, > > I asked a question about the RF probe, I have the diagram on page 46 with the > ability to " 10 pf" but there is another mounting tool spacing of buttons on > the front panel with a capacity, diode, a resistor, the same probe is? > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
