An update:
I have tried different USB ports on the computer and a different cable.
I cannot use a true RS232 cable as I have no true RS232 port.
So, I don't know if the P3 is fully loaded or not.
73,
Joel - W4JBB
On 2/28/13 5:43 AM, Joel Black wrote:
I absolutely cannot upgrade to the latest P3 FW (1.25). I had similar
issues with 1.24, but it eventually loaded after several attempts.
I have tried about seven or eight times and it always gets to the same
spot and I then get a message, "Elecraft P3 Utility quit
unexpectedly." FW version 1.24 would get to different spots before it
quit.
I am using the latest P3 Utility for the Mac 1.13.2.3. It also locks
up with a previous version of the P3 Utility.
I tried re-loading 1.24 and I get the same error at what appears to be
the same point of the load. I really cannot tell you where it stops as
the Utility quits and does not show the last message.
I can reboot the P3 and it appears to work fine and restarting the P3
Utility tells me whatever version FW is on it. However, it is a tad
disconcerting that the FW load never completes.
I have tried different baud rates, but it won't even attempt to load
at anything other than 38k4. I seem to remember reading somewhere that
you can only load FW at 38k4, but I cannot find that reference now and
I probably dreamed it.
If I am missing something, please, enlighten me.
Thanks,
Joel - W4JBB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html