Read almost all the posts and one stuck with me - the one who stated
everything worked fine on a Win7 machine using the same cable.
On a lark, I started my Win 7 virtual machine through VMware, downloaded
and installed the P3 Utility, and connected to the P3 - voila, it worked.
This is going through the exact same machine, using the same USB
adapater with the USB adapter plugged into the same port. In other
words, I did not change a thing. This VMware machine has caused me all
kinds of grief and has only recently started working somewhat reliably.
However, it allowed me to load the firmware.
The only thing different was the fact that I received FW 1.26 instead of
1.25.
None of this answers why the FW load (either 1.24 or 1.25) always
stopped at the same point in the load on the Mac version. I have no idea...
Thanks for the suggestions.
73,
Joel - W4JBB
On 2/28/13 5:43 AM, Joel Black wrote:
I absolutely cannot upgrade to the latest P3 FW (1.25). I had similar
issues with 1.24, but it eventually loaded after several attempts.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
