If you make that change, I think you may have a problem with running split.
However, with the new release of HRD this problem was cured in the CAT
commands so you do not need to change this setting on the K3.
I wish I could exactly remember what the issue was but I needed to change it
back to the default in order for my K3 to work the way I wanted to operate.
~73
Don
KD8NNU
-.- -.. ---.. -. -. ..-
-----Original Message-----
From: K5HM
Sent: Saturday, March 02, 2013 12:38 AM
To: [email protected]
Cc: [email protected]
Subject: Re: [Elecraft] Cannot Change bands with Ham Radio Deluxe
That was it Stewart. Fixed the problem.
Thanks.
73,
Ron, K5HM
[email protected]
www.qrz.com/db/k5hm
-----Original Message-----
From: Stewart Bryant [mailto:[email protected]]
Sent: Friday, March 01, 2013 6:52 PM
To: K5HM
Cc: 'Brian Alsop'; [email protected]
Subject: Re: [Elecraft] Cannot Change bands with Ham Radio Deluxe
Is this the problem:
http://groups.yahoo.com/group/ham-radio-deluxe/message/36382
and then applying the correction in the next email in the thread.
"In your config menu on the K3, go to "VFO IND" and set to "yes". That
should fix the problem."
- Stewart/G3YSX
On 01/03/2013 23:28, K5HM wrote:
HRD works ok with my old radio an ICOM 718. And seems to work with HRD
5.24. This is the only anomaly I found so far.
Haven't tried it with other logging programs yet. I am going to switch to
Logic 9 soon. Think it might be the CAT cable; will try that.
73,
Ron, K5HM
[email protected]
www.qrz.com/db/k5hm
-----Original Message-----
From: Brian Alsop [mailto:[email protected]]
Sent: Friday, March 01, 2013 4:01 PM
To: K5HM
Subject: Re: [Elecraft] Cannot Change bands with Ham Radio Deluxe
Has to be with HRD. Have three other logging programs here and all work
fine. Have you backed up a HRD version? Has HRD ever worked for you?
Have you tried other logging programs?
You need to know what HRD is sending to the K3 to diagnose the problem.
73 de Brian/K3KO
On 3/1/2013 21:46, K5HM wrote:
Currently using HRD Ver 5.24. under CAT Control. I click on a spot from
the
DX cluster and the K3 will switch to the new band and DX freq momentarily
then comes back to last band and freq. If the spot is in the same band
that
I am presently on, it will move to the new freq and stay there. But if
it
has to change bands it doesn't stick. ????
73,
Ron, K5HM
[email protected]
www.qrz.com/db/k5hm
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2238 / Virus Database: 2641/5640 - Release Date: 03/01/13
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2238 / Virus Database: 2641/5640 - Release Date: 03/01/13
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
