Don, I suspected something might be wrong with the watt meter, as it was borrowed from work and had not been used in a while. I was able to listen to quite a few signals last night, however I wasn't able to make any contacts. I brought my radio into work and tested it on a Rhode and Schwartz FSH8 with power sensor to double check the original power meter and the radio. Even with the radio set to 10W I was showing no power out.
I don't have the schematic handy, but can I do some signal tracing from between where the K2 takes its power reading and the BNC output? -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-Low-Power-Out-Hi-Current-tp7570850p7570930.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
