Thanks Don. With diodes that will work great. 73 Fred
-----Original Message----- From: Don Wilhelm [mailto:[email protected]] Sent: Fri 3/8/2013 11:08 AM To: Cady, Fred Cc: [email protected] Subject: Re: [Elecraft] RC2 - high side and low side different Fred, You can wire "OR" either the high side or the low side. If you are running the tribander on the low side, just connect the 10, 15, and 20 outputs together, and drive the bandpass filter from the separated low side outputs. Swap 'high' and 'low' if required. 73, Don W3FPR On 3/8/2013 12:56 PM, Cady, Fred wrote: > Thanks Jack. I figured that was the case. What I want(ed) to do is drive > the 6-pack x-bar switch which has a tribander on it so 10-15-20 will be > mapped to the same output PLUS drive a 6-band bandpass filter which > needs to have separate outputs for 10-15-20. Any ideas? > Cheers, > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
