That sound OK to me Dwight. 73 Fred KE7X
Fred Cady fcady at ieee dot org > -----Original Message----- > From: elecraft-boun...@mailman.qth.net [mailto:elecraft- > boun...@mailman.qth.net] On Behalf Of DGB > Sent: Sunday, March 17, 2013 11:17 AM > To: elecraft@mailman.qth.net > Subject: [Elecraft] PR6 6m pre-amp > > I have my PR6 preamp hooked up per the docs. I don't have the 6m ant > connected to ANT2 on the rig (as I've seen in other docs) as I have it > connected to the KAT500 ANT2 and have the KPA500 in-line as well. I > have > the KAT configured automatically switch to ANT2 when the rig is > switched > to 6m. I also have a 160m rcv antenna connected to the BYPASS IN on the > preamp and have DIGOUT1 configured to ON on the 6m band and OFF on all > the other bands. Nothing is connected to BYPASS OUT. I notice an > increase in gain when keying the RX ANT in when on 6m. There are no > sigs > on 6m right now so I'm wondering if it's working correctly. > > Can I assume that the PR6 is seeing the 6m antenna thru the tuner and > amp? > > 73 Dwight NS9I > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html