Thanks to all!
73 Dwight NS9I
On 3/17/2013 1:13 PM, iain macdonnell - N6ML wrote:
On Sun, Mar 17, 2013 at 10:16 AM, DGB <[email protected]> wrote:
I have my PR6 preamp hooked up per the docs. I don't have the 6m ant
connected to ANT2 on the rig (as I've seen in other docs) as I have it
connected to the KAT500 ANT2 and have the KPA500 in-line as well. I have the
KAT configured automatically switch to ANT2 when the rig is switched to 6m.
I also have a 160m rcv antenna connected to the BYPASS IN on the preamp and
have DIGOUT1 configured to ON on the 6m band and OFF on all the other bands.
Nothing is connected to BYPASS OUT. I notice an increase in gain when keying
the RX ANT in when on 6m. There are no sigs on 6m right now so I'm wondering
if it's working correctly.
Can I assume that the PR6 is seeing the 6m antenna thru the tuner and amp?
Unplug the antenna from the tuner and see if the noise level drops.
73,
~iain / N6ML
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
