Are you sure that the transmit offset test slide switch on the bottom of the RF board PCB is not in the test position?
Mike / KK5F -----Original Message----- >From: David L DuPuy <[email protected]> >Sent: Mar 21, 2013 7:57 PM >To: [email protected] >Subject: [Elecraft] K1 sidetone problem > >Has anyone else had any problems with the sidetone on the K1? I've just >finished building and at low power (0.5 watts) I have heavy key clicks when >sending. At higher outputs, I'm getting a dual tone with heavy clicks, >sounds like RF is getting into the audio. The problem is worse on 20m, but >it's a big problem on 40m too. Any ideas on where to look for a problem? > The transceiver appears to be working normally otherwise. thanks, Davi ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
