Hi Bill: To transfer the settings from the frequency from the main Rx to
the Sub Rx just press A>B. To transfer all the other relevant setting press
the A>B button again right after the first time. (see VFO Controlls (Upper
Row) on pg 15 of the IB. To do the filter selection in the Sub Rx using the
XFIL button, hold the B Set and then use the XFIL to make the filter changes
in the Sub Rx. (same IB reference).
73, Doug VE3MV
----- Original Message -----
From: "Bill W4RM" <[email protected]>
To: <[email protected]>
Sent: Friday, March 22, 2013 5:25 PM
Subject: [Elecraft] Filter help
I just install filters in my sub receiver to match my main receiver (1.8,
1.0 and 400Hz). I have configured them using the K3 utility SW program
and
it looks like they are set correctly in the program. So now how do I make
the sub receiver track the filter setting of the main receiver? I.E. if I
go to CW and select the FL4 400 HZ filter on the main receiver the SUB
receiver doesn't sound like the filter is selected. Same case in SSB
with
1.8khz filter. Also I don't understand how to manually select a filter on
the sub receive like I can on the main receiver using the XFIL button.
Any help would be great.
73 Bill W4RM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
