Hello, Brian. Install the Elecraft K3 Utility, it's available at http://www.elecraft.com/K3/k3_software.htm#k3util
Start the K3 Utility. Navigate to the "Configuration" tab. Click "Configure Crystal Filters". Click "Help" at the lower right corner. Follow the instructions in Help. You might also want to review the section of the K3 Owner's Manual available at http://www.elecraft.com/K2_Manual_Download_Page.htm#K3, see page 46. 73 de Dick, K6KR -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Brian North Sent: Monday, March 25, 2013 5:03 AM To: [email protected] Subject: [Elecraft] K3-100 Hello, my first question on the site! Can anyone tell me what the set-up is for configuring the filters please. my present set-up is: FM= 1300khz. Slot 1 AM-TX= 600khz. Slot 2 CW/SSB= 2.70khz. Slot 3 Data/Am= 0.50khz Slot 5 Are these correct, and / or what is the correct configuration please? Many thanks in anticipation. Brian 2E0BWQ Sent from my iPad ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
