hello all, hello Don, thank you for the explanation, it is that I did not think this factor
Thank you, I learn a lot with very interesting list, and big thanks to Don for us to share his knowledge. K2 # 7369 73 , Christophe F8ACF-56 ________________________________ De : Don Wilhelm <[email protected]> À : Christophe F8ACF-56 <[email protected]> Cc : "[email protected]" <[email protected]> Envoyé le : Lundi 25 mars 2013 14h22 Objet : Re: [Elecraft] K2 Part 2 and alignment Christophe, The voltage that you see in the display will always be lower than the voltage at the input power jack. There is a reverse polarity protection diode in the K2 and there is a slight voltage drop across the fuse. That will make the voltage inside the K2 0.4 to 0.5 volts lower than the voltage of your power source. 73, Don W3FPR On 3/25/2013 8:28 AM, Christophe F8ACF-56 wrote: > hello all, > > Part 2 and alignment validated everything is OK, BFO = 5.9 kHz, VCO of 2.17 V > to 6.0 V, 13 KHz PLL so it's OK > > Song minor or I do not see how pressing the button "display" was the voltage > and amperage, the amperage is only Ok, there is a gap between the multimeter > reading and that of K2, I not know the origin or the setting of this part > > for those that want to place or is the video test:: > > http://dl.free.fr/tS9ocrCFC > > thank you for your help > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
