I operate digital modes with the K2/KPA with a SignalLink computer interface. The SignalLink drives the microphone input to the K2. The K2 has compression turned off (1:1) and a mike gain of 3. The SignalLink computer interface is at 100% gains on both sides and the SignalLink has the default internal gain jumpers.
I get occasional comments that I'm splattering, a very serious concern. Unfortunately I lack instrumentation to study the problem. How should I set the audio (SignalLink) drive gain and the RF (K2 Power) drive? My normal operation is not smoke-producing, so this is not a duty-cycle question. Thanks, Chris NQ8Z -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-SignalLink-Setting-gains-for-digital-modes-tp7572576.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
