Chris,
With your soundcard gains at maximum, it is possible that the output is
being overdriven and causing distortion (they are not "out of the
picture" at all.
I suggest you reduce the soundcard gain to the range of 1/2 to 2/3 of
full which will allow more range on the SignaLink gain.
73,
Don W3FPR
On 4/14/2013 2:40 PM, Chris Kimball wrote:
Thanks for the comments.
I'm using Olivia/Contestia most of the time rather than MPSK. The possible
splatter is with the SignalLink gains at 9 o'clock, a near minimal setting.
Aside from the transmit gains, the system is operating normally, and the
sound card is clearly recognized and in use. The sound card gains are
maximized just to take them out of the picture.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
