Bob,
when you are in "TUNE", what is PWR set to? You can check by turning
that knob; just make sure the LED under PWR is lit, not the one under CMP...
The setting is independently adjustable from the power setting while in
transmit.
Also, just out of curiosity, are you feeding a dummy load or an antenna,
and what does the SWR look like?
73 de Dave, W5SV
On 4/24/13 7:56 AM, Bob G3PJT wrote:
Hi
Suddenly K3/100 serial 3650 refuses to give power out.
Setup is
- VOX is on (SSB and CW)
- not in TEST
- CONFIG TX INH is OFF
- CONFIG KXV3 is nor
- No output when TUNE
Firmware reloaded and is 4.60, 1.15, 2.80, 2.80
I have reloaded my back up configuration file and it still doesn't work.
I had a similar problem a month ago on CW but that seemed to clear itself
Ideas?
73 Bob G3PJT
_____________________________________
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
