I'm no expert in assembling the K2, but, in RX, the SSB option only uses the additional xtal filter. If SSB sounds like SSB received on AM, my guess would be that the BFO (RF board) is not oscillating. Maybe pulling the crystal to far makes it instable. Is it on both sidebands?
Since the K2 switches from a "oscillator above rx frequency scheme" to a "oscillator below rx frequency scheme" somewhere, there are possibly bands where USB doesn't work but LSB does work and reverse. Greetings, Ralf, DL6OAP Am 20.05.2013 um 16:45 schrieb Christophe F8ACF-56 <[email protected]>: > Hello to all, > > since I installed my KSB2 I correctly RECEIVE SSB only on 14 MHz and 21 MHz 7 > is not clear on closer understanding is CW, although this may not be entirely > clear. > > I would say it is like when you are in AM and you listen a "SSB station" > > thank you for your help > > K2 # 7369 > > > 73 , Christophe F8ACF-56 > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
