Hello Brian, Be sure that you run the auxiliary KSYN3 procedure, as specified in the "Preparing for Operation" section of the manual (pg. 43 of my manual). If you don't, you'll experience just what you describe. You can probably guess how I happen to know that ;-)
73, Dale WA8SRA > Somehow I broke the connector J92. The center pin broke flush with the > board while I was inserting the coax connector. > > What is my next move? > > I thought that line was needed only if I want to use the external BNC > connector for "receive only" on the sub-receiver. However, I seem to have > no signal in the KRX-3 --- S meter zero, just noise. There is somthting > about this I don't understand. > > I am prepared to do without the BNC connector option. How do I get the > sub-receiver working? Is there something I have setup wrong? > > de Brian W3BNW > > > > > *Brian F. Wruble, C.F.A. > > *70 is the new 40.* > * > Mail: 1107 Key Plaza, PMB 447 Key West, FL 33040-4077 > Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD 21930 > eFax 305.768.0278 > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
