When I use Data-A on the KX3, FLDIGI shows the incorrect operating frequency and I don't know how to fix that. The frequency is correct when I use the side band.
- Brendon KK6AYI On May 30, 2013, at 2:53 PM, Greg wrote: > And always best to use Data-A for data modes via soundcard (or AFSK-A > for RTTY). This will help with a clean signal by keeping compression > turned off to avoid over-driving the audio chain. > > 73 > Greg > > > On 5/30/13, David Sanders W4DES <[email protected]> wrote: >> I'm using the SignaLink USB. SignaLink sells various cables to hook up to >> different radios. You need to get the cable part no. SLCABK3. It plugs >> into the line input, line output and PTT input jacks on the back of the K3. >> In addition, you will reconfigure some jumper wires inside the SignaLink >> USB. Instructions come with the cable. >> 73, >> David Sanders W4DES >> K3 (7409) >> >> >> >> On May 30, 2013, at 5:37 PM, Richard W Hemingway <[email protected]> >> wrote: >> >>> Hi, >>> >>> I think that I may have messed up and it got away from me. What I was >>> asking is whether any of you are using SignaLink USB. Where do the cables >>> plug in on the back of the K3. Do you have to turn on Data or can you use >>> SSB? I have written to SignaLink but have not received an answer. I know >>> that you don't have to use SL for PSK, and I may not go that way, but I >>> have it for the rig I just sold and Would like to use it if I can. >>> >>> Dick, N5XRD ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
