Hi all, Been there; done that. After I finally figured out what I had done and then checked the equipment, I was very thankful Elecraft makes rugged equipment that can often withstand some unintentional abuse.
Steve, W2MY -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom Hammond Subject: [Elecraft] KAT100 woes... Time to 'fess up... It seems that, during my haste to get everything reconnected (remember, somewhere about 30 lines above in this treatise)... I'm managed to connect the RF OUT from the KPA100 to the ANT1 jack on the KAT100 and the coax from the external antenna switch to the RF IN jack on the KAT100... in short, I had the RF IN and ANT1 connections reversed!!!!! Swapped these two connections on the back of the KAT100 and EVERYTHING WORKED PROPERLY!!! -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.12.4/143 - Release Date: 10/19/2005 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
