yep, that was it! so many things I don't know about this radio ;)
tnx de w1rt/john On Thu, Jun 6, 2013 at 11:20 AM, Dick Dievendorff <[email protected]>wrote: > This is a guess, but there is a way to configure which bands are "mapped" > by > the band switch up/down. See CONFIG:BND MAP. > > 73 de Dick, K6KR > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of John D'Ausilio > Sent: Thursday, June 06, 2013 5:41 AM > To: Elecraft Reflector > Subject: [Elecraft] k3 band up/down skips transverter band > > I'm getting ready to go out roving for the first time with a K3 as the IF > radio for my low bands (6-432). I've programmed in transverter bands 1-3, > but for some reason the rig skips 144 and goes to 222 on band up (and > similarly skips 144 and goes to 50 on the way back down). If I direct freq > enter a 144MHz frequency it correctly selects xv1, it just won't go there > with the band up/down. > > Any ideas? > > de w1rt/john > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
