Dick,
No, it's a hardware jumper. See the "Configuration" section (page 24)
of the P3 Manual.
73,
~iain / N6ML
On Mon, Jun 10, 2013 at 8:04 AM, Richard Fjeld <[email protected]> wrote:
> Alan N1AL,
>
> (If you have the power-on jumper in the P3 configured to always-on, )
>
> I don't remember reading a reference to 'the power-on jumper'. I do remember
> something in the menu settings. Is this what you are referring to?
>
> Dick, n0ce
>
> ----- Original Message -----
> From: Chuck Guenther
> To: [email protected]
> Sent: Monday, June 10, 2013 9:05 AM
> Subject: [Elecraft] [K3} P3 Failure? fixed!
>
>
> Thanks, Alan! That did the trick. (actually, I found that procedure in
> the P3 manual).
> I wish I had written down the transfer gain that I had setup during my
> amplitude calibration a year or two back.
>
> The gain is set to -7 dB now, which I believe is the factory default.
>
> I t was strange, though, tuning the bands for even a few minutes without
> the P3. I hadn't realized how much I have grown to depend on it!
>
> 73 & thanks again.
>
> Chuck Guenther NI0C
>
>
>
> N1AL wrote:
>
> "It sounds like a configuration parameter got corrupted somehow in
> non-volatile memory. Try doing a "Parameter Initialization" as described
> in the Troubleshooting section of the manual. That is, write down your
> FN key assignments and MENU parameters, then hold the LABELS key while
> turning on the P3 with the POWER switch. Wait until the "CONFIGURATION
> RESET" message appears on the screen and release then release the LABELS
> key. (If you have the power-on jumper in the P3 configured to
> always-on, then just hold LABELS and tap POWER.) Then re-enter the FN
> key assignments and MENU parameters.
>
> Alan N1AL"
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
