Hi Jim. I've had the same problem with my K1. It turned out to be a bad crystal, so my suggestion is to get another crystal for the 15m band. 73 de Hal la4xx
On 13-06-12, Jimithy66 <jimith...@gmail.com> wrote: > My K1 was a wonderful radio on all bands 40 - 17m. > > However 17m saw very little use and 15m was desired.. > > The 26.050 crystal was replaced with the kit supplied 29.000 MHz > crystal for 15m and the K1 realigned on all bands. > > All seemed to go well with the receive and transmit alignment > with the power level set to 2 watts per the manual. > > However now the power will not go above 2 watts on 15m.. > > All bands go to 5 watts measured on a WM-2 watt meter > but on 15m the output stops at 2 watts.. > > 15m programs OK from 0.2 to 2.0 watts output but not higher. > > The K1 display reads 5.0 when being set with buttons but > the K1 power output display reads only around 2.1 or so watts. > . > All frequencies are correct on another receiver. > > Am I missing something ? Any help would be appreciated. > > Thank you , 72/73 > > Jim / W1FMR > > > > > > > > . > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net <Elecraft@mailman.qth.net> > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html