Yay! XG2 into AuxRF shows it's wired as I suspected.
Now to get the converter assembled. More toys... 73 jim ab3cv On Sun, Jun 16, 2013 at 6:31 PM, Jim Miller <[email protected]> wrote: > Hi Ron > > Thanks for the info. I had just discovered it as well in the KRX3 manual. > I'll have to fire up a XGen to see which way I connected it when I > installed it. > > 73 > > jim ab3cv > > > On Sun, Jun 16, 2013 at 6:15 PM, Ron D'Eau Claire <[email protected]> wrote: > >> That's right Jim: You can have the subrx use ANT1 or ANT2 out of the >> KAT3, >> whichever is NOT being used for xmit or you can connect the AUX RF input. >> >> See the KRX3 Installation and Operation manual. It's available on the >> Elecraft WEB site here: >> >> >> http://www.elecraft.com/manual/KRX3_Subreceiver_Install-Operate_Manual_Rev_E >> .pdf<http://www.elecraft.com/manual/KRX3_Subreceiver_Install-Operate_Manual_Rev_E.pdf> >> >> Pages 25 and 26 show the optional ways to connect the subrx antenna input >> either to the KAT3 or to the rear-panel AUX RF input. >> >> Page 43 shows the MENU settings required. >> >> 73 Ron AC7AC >> >> -----Original Message----- >> From: [email protected] >> [mailto:[email protected]] On Behalf Of Jim Miller >> Sent: Sunday, June 16, 2013 2:24 PM >> To: Elecraft Reflector >> Subject: [Elecraft] [K3] Aux RF >> >> I've got a little LF converter to play with an I thought I'd use it with >> the >> AUX RF input and the SUBRX. >> >> I've got a PR6 and beverages connected to the normal RX path and I don't >> want to mess with that. >> >> I seem to remember there was a wiring election when putting in the KAT3. >> Do >> I remember that right? Taking one election meant not being able to use the >> AuxRF. I could be confused... >> >> Just thought I'd ask before taking the K3 apart unnecessarily. >> >> 73 >> >> jim ab3cv >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> >> >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
