running vs 4.67 | 1.115 | 2.81 | 2.81 | 1.03
I remember there was a discussion about improving the K3's cw decoding after
some agc upgrade that took place a long time ago. I wonder if what we have now
is the 'final' version that we are just going to have to settle for?
I ask because I am still having a lot of trouble with cw decodes
I run thr 2 and cw 5-40 but decoding is just about useless
I have tried agc slow/fast and off
I have played with rf gain as well as filter widths
(I have 200 & 500hz filters as well as the 2.7 ssb filter installed)
with my new external svga display for the P3, I was looking forward to doing
some lazy cw monitoring on the external monitor
at best I can copy strong stations like ARRL's code practice runs well,
but trying to decode most other cw qso's is pretty bad.
what was the older firmware version that did such a good job with decoding?
also if you do have it working, what setting are you using that do work?
TIA
--
GB & 73
K5OAI
Sam Morgan
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
