I K2 users I am busy to assembel my front panel control board.
I am quit sure about how mounting the backpanel LCD light but I will be sure before soldering it into the PCB board. - I presume the "K" indication of the LCD backlight unit must be soldered into the "+ (plus) indication on the front panel of the PCB board ? - And the "A" indication of the LCD backlight unit must be soldered into the "no indication" on the frontpanel PCB board ? This is not clearly explained into the builders manual,but after some investigation the direction of the backlight does not play any rule,you could not mis allign this backlight unit into the frontpanel board. Every position brings the "K" connections of the backlight to the "+ connection" on the PCB board !!! Thanks es kindly regards Jean ON4AEF. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
