Hi Hank, That is a standard problem with RS232 ports when they have not been powered up before the K3. One solution is to go into your CW WGHT menu and tap the 4 key to select VOX AUTOOFF. This takes the K3 out of VOX mode when you turn the K3 off so when you turn it on again it can't be keyed, either by the internal keyer, the back panel KEY IN or the RTS/DTR signals (the culprits) in the RS232 interface. Then, after you power up the computer you can hold VOX to be able to send or transmit using VOX. The K3 will display VOX=OFF the first time you try to send without re-enabling VOX. I often program the power-on banner (using the K3 utility) to display VOX OFF. Cheers and 73, Fred KE7X
Fred Cady "The Elecraft K3: Design, Configuration and Operation 2nd Ed" "The Elecraft KX3 - Going for the Summit" www.ke7x.com www.lulu.com (July 20% discount is JULYBOOKS13) fcady at ieee dot org > -----Original Message----- > From: [email protected] [mailto:elecraft- > [email protected]] On Behalf Of Pfizenmayer > Sent: Thursday, July 11, 2013 3:07 PM > To: [email protected] > Subject: Re: [Elecraft] K3 / P3 - RS232 ??? > > New K3 user -- it boots up in transmit if the RS232 attached laptop has > not > been booted up first . And no amount of button pushing that I have > found > will take it out of transmit. (other than power off - but back on and > still > in transmit) > > What do I have set wrong ??? This is a real RS232 not a USB-RS232 > dongle. > All works fine if computer is booted up first - communicates with N1MM > etc > etc > > > Hank K7HP > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
