On 7/11/2013 2:07 PM, Pfizenmayer wrote:
New K3 user -- it boots up in transmit if the RS232 attached laptop has
not been booted up first . And no amount of button pushing that I have
found will take it out of transmit. (other than power off - but back on
and still in transmit)
What do I have set wrong ??? This is a real RS232 not a USB-RS232 dongle.
All works fine if computer is booted up first - communicates with N1MM
etc etc
RTS and DTR can be configured to assert PTT and key the K3. It is
controlled by a menu entry CONFIG:RS-232, and there are several choices
including turning it off. Turn them off in the menu and your problem
should go away. I think you have to have CONFIG:TECH MD set to ON to
see the RS-232 menu entry.
73,
Fred K6DGW
- Northern California Contest Club
- CU in the 2013 Cal QSO Party 5-6 Oct 2013
- www.cqp.org
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
