Stan, That was exactly it. REF CAL was way off, about 63 counts. Calibrated against WWV and it's fine now.
Thanks and 73, - Steve WX2S. ________________________________ From: "Stan Gibbs, KR7C [via Elecraft]" <[email protected]> To: WX2S <[email protected]> Sent: Monday, July 15, 2013 5:24 PM Subject: Re: Bright line in bar cursors Tuning the radio such that the bright cursor bar (VFO frequency) is aligned with the received signal should give you exactly the pitch that you set unless your P3's REF CAL menu setting is incorrect. WX2S wrote >I would like to set up the bright line in the bar cursors in CW mode so that >it indicates not the VFO frequency, but the proper place to tune for the >correct sidetone pitch. Is there a way to do this? 73, Stan - KR7C ________________________________ If you reply to this email, your message will be added to the discussion below:http://elecraft.365791.n2.nabble.com/Bright-line-in-bar-cursors-tp7576736p7576762.html To unsubscribe from Bright line in bar cursors, click here. NAML -- View this message in context: http://elecraft.365791.n2.nabble.com/Bright-line-in-bar-cursors-tp7576736p7576767.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
