Paul and Tom, That would be great if it could be added as an option, but probably not necessary. As I noted before, it occurred because the P3's clock was not calibrated correctly with respect to the K3. Once I adjusted the clock, tuning the K3 to put the bright line on top of the received signal beat the signal to the sidetone frequency, within a few hertz.
An alternative to adding a software option would be a slight mod to the manual, advising operators to calibrate the P3 frequency and describing what the position of the bright line indicates in each of the receive modes (CW, SSB, RTTY, etc.) I'd expect that this would be true regardless of where I set the sidetone in the K3. 73, - Steve WX2S. ________________________________ From: Tommy Alderman [via Elecraft] <ml-node+s365791n7576876...@n2.nabble.com> To: WX2S <steve.mastic...@verizon.net> Sent: Thursday, July 18, 2013 12:56 PM Subject: Re: Bright line in bar cursors If you in fact do this, please make it operator selectable via the menus. I am not quite sure what the "correct sidetone pitch" is as for the past 60 years I select the sidetone pitch to suit my own ears. Thanks and 73, Tom - W4BQF -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of Paul Saffren N6HZ Sent: Thursday, July 18, 2013 12:13 PM To: [hidden email] Subject: Re: [Elecraft] Bright line in bar cursors Hi Steve, I talked with Alan about this and it looks like it is something we could add, probably via a menu entry. We'll put it on the to-do list. Paul Paul Saffren - N6HZ Project Manager Elecraft Inc. 831-763-4211 x122 www.elecraft.com On 7/14/2013 7:23 PM, WX2S [via Elecraft] wrote: > Hi, all, > > I would like to set up the bright line in the bar cursors in CW mode > so that it indicates not the VFO frequency, but the proper place to > tune for the correct sidetone pitch. Is there a way to do this? > > Thanks and 73, > - Steve WX2S. > > > ---------------------------------------------------------------------- > -- If you reply to this email, your message will be added to the > discussion below: > http://elecraft.365791.n2.nabble.com/Bright-line-in-bar-cursors-tp7576 > 736.html > > To unsubscribe from [P3], click here > <http://elecraft.365791.n2.nabble.com/template/NamlServlet.jtp?macro=unsubsc ribe_by_code&node=7419393&code=cGF1bHNAZWxlY3JhZnQuY29tfDc0MTkzOTN8LTU0NDI4O DMzNA==>. > NAML > <http://elecraft.365791.n2.nabble.com/template/NamlServlet.jtp?macro=m > acro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.nam > espaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble > .view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabb > le%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_emai > l%21nabble%3Aemail.naml> > -- View this message in context: http://elecraft.365791.n2.nabble.com/Bright-line-in-bar-cursors-tp7576736p75 76872.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ________________________________ If you reply to this email, your message will be added to the discussion below:http://elecraft.365791.n2.nabble.com/Bright-line-in-bar-cursors-tp7576736p7576876.html To unsubscribe from Bright line in bar cursors, click here. NAML -- View this message in context: http://elecraft.365791.n2.nabble.com/Bright-line-in-bar-cursors-tp7576736p7576883.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
