Don,
I've lucky so long that I've totally forgotten that point. It's
really bad when you get old. :-)
73,
Barry
K3NDM
On 7/18/2013 11:31 AM, Don Wilhelm wrote:
Ariel,
Nothing wrong with that plan at all. Bond the computer and the KX3
together and power everything from the same AC outlet to minimize
common mode noise problems. If that is not possible, you may have to
add isolation transformers in the audio lines.
See the information provided by Jim Brown K9YC on the bonding
solution. He has posted it many times here on the Elecraft reflector.
73,
Don W3FPR
On 7/18/2013 11:10 AM, Ariel Jacala wrote:
Barry and Don
I have the Signalink USB. However I have it dedicated to the K2.
For the KX3, I was thinking of creating a dongle with the attenuation
resistors Don suggested instead of buying another Signalink. I
realize that I will still have to adjust the soundcard levels to make
the TX just tickle the ALC. Is there a flaw in this plan?
Ariel
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
