Brandon gave me about an hour on the phone, and we got all the settings  just 
right.  I can now operate remotely using RemoteRig and the K3/0 to my K3/100.  
It works --- with a couple of quirks.

Quirk 1--- if you use the Heil ProSet Elite iC (made specially for Icom,) the 
jumper JMP1 in the control box has to be in.  Other Heil mikes require jumper 
out.  I figured that out after Brandon got me going.  I have another Heil 
Proset that is not the special Icom version which I was using when Brandon was 
talking me through the setup.    I later inadvertently switched to the iC 
version and nothing worked again, until I put the jumper back on.

Quirk 2 --- I keep finding that I lose comms between the "control" and the 
remote "radio" box periodically.  I can only get it back by rebooting routers. 
THAT one worries me.   2 days in a row, when I went to bed, everything worked.  
When I got up the next morning, turning on the K3/0 did not bring up the K3.  I 
couldn't get it working until I rebooted the remote and the local routers.

Perhaps this is a function of my LAN setup.  I have a primary router where the 
internet comes in, and a downstream router to extend the wifi to other parts of 
the house.  I am running the K3 from the primary router, and the K3/0 from the 
downstream router to simulate true remote ops --- it is actually in my 
daughter's upstairs bedroom.  It works fine until it doesn't work, and I have 
no idea why that happens.  Obviously port forwarding is setup right or it 
wouldn't work at all.

In any event, I thought the info on the Heil ProSet Elite "iC" version might 
save somebody out there a lot of grief.

If anyone has suggestions on Quirk 2, I am all ears.


73 de Brian W3BW




-- 
70 is the new 40.

Brian F. Wruble, C.F.A.
1107 Key Plaza, PMB 447 Key West, FL 33040 
Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD 21930    
eFax  305.768.0278   Skype   bwruble   

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to