I am not an authority on Remote Rig, but it would seem to be that JMP1
controls the microphone bias.
The Heil Proset-K2/K3 sold by Elecraft is essentially the same as the
Proset-iC in that it needs bias to operate.
There are so many versions of Heil microphones that one needs to be
specific about which one you have available.
Just saying Heil Proset is not sufficient, be aware of the specific models.
Sorry, but I cannot help with "Quirk 2", it sounds like that has to do
with your particular LAN configuration and the performance of your
specific routers. You might consider replacing your 'downstream router'
with an access point rather than a router.
73,
Don W3FPR
On 8/14/2013 7:37 PM, [email protected] wrote:
Brandon gave me about an hour on the phone, and we got all the settings just
right. I can now operate remotely using RemoteRig and the K3/0 to my K3/100.
It works --- with a couple of quirks.
Quirk 1--- if you use the Heil ProSet Elite iC (made specially for Icom,) the
jumper JMP1 in the control box has to be in. Other Heil mikes require jumper
out. I figured that out after Brandon got me going. I have another Heil
Proset that is not the special Icom version which I was using when Brandon was
talking me through the setup. I later inadvertently switched to the iC
version and nothing worked again, until I put the jumper back on.
Quirk 2 --- I keep finding that I lose comms between the "control" and the remote
"radio" box periodically. I can only get it back by rebooting routers. THAT one worries
me. 2 days in a row, when I went to bed, everything worked. When I got up the next morning,
turning on the K3/0 did not bring up the K3. I couldn't get it working until I rebooted the remote
and the local routers.
Perhaps this is a function of my LAN setup. I have a primary router where the
internet comes in, and a downstream router to extend the wifi to other parts of
the house. I am running the K3 from the primary router, and the K3/0 from the
downstream router to simulate true remote ops --- it is actually in my
daughter's upstairs bedroom. It works fine until it doesn't work, and I have
no idea why that happens. Obviously port forwarding is setup right or it
wouldn't work at all.
In any event, I thought the info on the Heil ProSet Elite "iC" version might
save somebody out there a lot of grief.
If anyone has suggestions on Quirk 2, I am all ears.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
