Hi Hisashi, >From the photo is looks like you have your REF LVL set too high. The base signal (noise level) should be slightly below the dividing line between the upper display and the waterfall. Press the REF LVL button and turn the SELECT knob counterclockwise until the noise level just disappears.
The REF LVL will need to be changed from band to band but the P3 remembers the setting on each band. Of course the level also changes with atmospheric conditions, time of day, antenna direction, etc.. 73, Mike K2MK Hisashi T Fujinaka wrote > I just got my P3 SVGA card and it's just showing video noise in the > waterfall. I reloaded the firmware just to see if that would fix things, > and it did not. > > I'm not sure if you can attach things to the posts on here, so a picture > of the display is at: > http://www.i8u.org/~htodd/badwaterfall.jpg > > Any help would be appreciated. > > -- > Hisashi T Fujinaka - > htodd@ > BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-SVGA-Has-anyone-seen-garbage-in-the-waterfall-display-tp7578217p7578228.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
