Hello Hisashi, It looks like you have a very high noise level, or, you never ran the level calibration for the P3. Other than a few blips on the right half of the screen, I don't see any signals, so I wouldn't expect to see much of anything in the waterfall either.
That said, you can put the waterfall into a more usable range by simply adjusting the "REF LVL" (on front panel of P3) downward until the bottom edges of the noise spikes in your spectrum display baseline are just hitting the bottom of the diving line between the spectrum display and the waterfall display. That will produce the detail you're looking for in the waterfal display. 73, Dale WA8SRA > I just got my P3 SVGA card and it's just showing video noise in the > waterfall. I reloaded the firmware just to see if that would fix things, > and it did not. > > I'm not sure if you can attach things to the posts on here, so a picture > of the display is at: > http://www.i8u.org/~htodd/badwaterfall.jpg > > Any help would be appreciated. > > -- > Hisashi T Fujinaka - [email protected] > BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
