On Sat, Aug 24, 2013 at 9:58 AM, Steven Bertsch <[email protected]> wrote:
> My friend uses the K3/0 to connect to my K3, and that works fine.
>
> But when I use my K3, I use Ham Radio Deluxe which would normally connect to
> the 9 pin RS232 on the back of my K3, but since I have one of the remote
> boxes connected to my K3 9 pin RS232, I would use the com1 on the front of
> the remote box. I have Ham Radio Deluxe set for com1 but it won't connect to
> my K3 now.
>
> Has anyone had this problem?
There's some configuration required on the RRC units to make that
work. Specifically, you need to set "COM1 mode" (under "Serial
Settings") to either "Mode 6" or "Mode 7" (depending on whether or not
your friend also wants to connect rig-control software to the RRC at
his place).
73,
~iain / N6ML
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
