It works!!! FANTASTIC!!! Thanks so much iain. I had to make the baud rate change to 38400. It was set to 9600.
73, Steve K6SAB On Aug 24, 2013, at 11:00 AM, iain macdonnell - N6ML <a...@dseven.org> wrote: > On Sat, Aug 24, 2013 at 9:58 AM, Steven Bertsch <sabert...@gmail.com> wrote: >> My friend uses the K3/0 to connect to my K3, and that works fine. >> >> But when I use my K3, I use Ham Radio Deluxe which would normally connect to >> the 9 pin RS232 on the back of my K3, but since I have one of the remote >> boxes connected to my K3 9 pin RS232, I would use the com1 on the front of >> the remote box. I have Ham Radio Deluxe set for com1 but it won't connect to >> my K3 now. >> >> Has anyone had this problem? > > There's some configuration required on the RRC units to make that > work. Specifically, you need to set "COM1 mode" (under "Serial > Settings") to either "Mode 6" or "Mode 7" (depending on whether or not > your friend also wants to connect rig-control software to the RRC at > his place). > > 73, > > ~iain / N6ML ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html