Mike,
I think you mean Keyout rather than PTT -- PTT is an input signal to the
K3 generated by an external device such as a footswitch..
The use of TX INH does not prevent the Keyout signal from activating -
it should click the relays and start your sequencer. BUT it does
prevent RF from being transmitted which will protect your preamps and
other things that need to be protected during the sequencer time.
A typical sequencer will complete its cycle in a few tens of
milliseconds. If you don't like the Keyout state changing with keying,
use semi-break-in and set the delay to whatever time period you desire
to keep the Keyout active between characters, words, etc. - that time
will depend on your keying speed..
73,
Don W3FPR
On 8/27/2013 5:44 PM, AD6XY wrote:
Hi Don,
That doesn't work too well because the PTT signal still bounces up and down
setting off all the relays. My IC735 used to have a VOX delay which you
could set to something long to prevent that - but unless I missed a menu I
can't seem to find where you set the CW VOX hang time.
Mike
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Feature-request-Disable-Break-In-on-K3-tp7578303p7578313.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
