John, I have adjusted my Rx EQ to attenuate the higher freqs. Also, I usually have the RF Gain and preamp set so that noise floor is just audible. My Preamp is almost always off.
With AF Gain at 12 o'clock and RF Gain at 3 o'clock, engaging NR at the 1-2 setting is VERY quiet. (This probably depends alot on your ambient noise and speaker/headphone sensitivity.) My only complaint about NR is the brief muting that occurs while the filter rebuilds upon changing bandwidth settings. I would prefer to hear a noisy signal during this period rather than complete muting. I have no idea if that is something that could be done in the coding... I frequently find myself adjusting the RF gain control to the noise floor, whether i'm using NR or not. I wish there were a single button push that could do this. Perhaps on some future rig... 73, Drew AF2Z On Thu, 05 Sep 2013 12:38:46 -0400, you wrote: >Eric - > >What NR settings are you using on CW? I can't get rid of the background >white noise with the K3 NR like I can with my Orion NR. I wish I could! > >My K3 is never 'silent' with NR turned on. > >73 de K1ESE >John > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
