It would really be nice if K3 would support 80m as a transverter frequency. If it did it would enable 3.5-4.0Mhz to reflect the full 500Khz from a low band transverter.
jim ab3cv On Tue, Sep 10, 2013 at 7:05 PM, Michael Mussler <[email protected]>wrote: > While the K3 is not designed for direct operation at 600m and below > (filtering is designed to protect 160m operations from BC band > interference) the K3 features that support use of transverters make this > rig one of the best for use as an IF. There are separate ports and > electronic switching for the transmit and receive converters and the > display can be programmed to read out the operating frequency including > offsets for the converter local oscillators. An external frequency > reference option is also available. It is so convenient to use with a > transverter that I often forget the external gear between the K3 and the > 600m antenna. > -Mike Mussler > AI8Z > WD2XSH/12 > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
