of course I meant upconverter not transverter... jim ab3cv
On Tue, Sep 10, 2013 at 7:58 PM, Jim Miller <[email protected]> wrote: > It would really be nice if K3 would support 80m as a transverter > frequency. If it did it would enable 3.5-4.0Mhz to reflect the full 500Khz > from a low band transverter. > > jim ab3cv > > > On Tue, Sep 10, 2013 at 7:05 PM, Michael Mussler > <[email protected]>wrote: > >> While the K3 is not designed for direct operation at 600m and below >> (filtering is designed to protect 160m operations from BC band >> interference) the K3 features that support use of transverters make this >> rig one of the best for use as an IF. There are separate ports and >> electronic switching for the transmit and receive converters and the >> display can be programmed to read out the operating frequency including >> offsets for the converter local oscillators. An external frequency >> reference option is also available. It is so convenient to use with a >> transverter that I often forget the external gear between the K3 and the >> 600m antenna. >> -Mike Mussler >> AI8Z >> WD2XSH/12 >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
