KAT500 Utility on my Mac mini does not connect from the Mac to KAT500. When I fire up the Utility, it stays in "Initializing" state until the connection attempt times out. This is repeatable. I'm pretty sure the FTDI driver itself is OK as I refreshed the P3 firmware using a separate KXUSB via FTDI to the same Mac via virtual port …A400THz. No problem there. The KXUSB via FTDI <> KXUSB for the KAT500 should be using a second virtual port ….A900I9J as there's a separate KXUSB cable for the KAT500, but will not connect. The names of the virtual ports' names were determined via the System Profile tool. I've swapped in a third known-good KXUSB cable with the same failure to connect. The KAT500 has successfully connected to a Window 7 PC using both KXUSBs. Mac users, what am I missing ? -- Buzz - W6BZZ
[email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
