I'm cheap. I don't throw things away until they are beyond any reasonable use plus I like toys. So here is how I run my K3 remotely:
I have an old laptop for the shack computer. It runs HRD, has a four port USB-Serial cable and wifi to the home LAN. It takes only a little power, doesn't cost much to run (but I'll have to upgrade it to Win7 soon). Via HRD, I have full control of the K3 (the next version of HRD will even improve this). By using a SignaLink USB for radio audio, I don't ever worry about OS noises being transmitted. SLUSB=radio, OS=laptop speakers I can run the basic K3 via HRD at home or while away (remote); even from another computer in the house. BO-ring since I have the KPA500 and KAT500 as well. So; I use TeamViewer (free) to remotely control my shack laptop from another computer, laptop, iphone or ipad. This allows me to also run the utility programs for the KPA500/KAT500 so I can switch antennas, manage the amp (on/off, watch temps, SWR etc) and check that the KAT500 tuning is valid (remember the 4 port serial cable?). The second K3 antenna port is ALWAYS connected to a dummy load in case I goof; the KAT500 is my antenna switch. I use Skype (two accounts) when running remotely and have set it to treat the SLUSB as its main audio device EXCEPT for anything that shouldn't go there (like ring tones, dialing noises etc.). Just use it for the mike and speaker, no OS. Bonus: I use the web cam on Skype video so I can 'see' the P3 panadapter display (or my weather station) remotely. It's possible to make changes to the P3 via macros but I don't bother. You may wonder about shack access security; by using TeamViewer to access my shack laptop (shack-top?) I can leave Skype NOT in autoanswer mode and answer my own calls, remotely. All other inbound calls are ignored (no auto-answer). TeamViewer and HRD are fairly secure and I've had no issues. In the event that there is a power failure, someone has to have physical access to the station to turn the K3 power back on. I'm working on this (use an alarm or tickle the ACC line for now). That someone also makes a pass through the house to water plants, grab the papers etc. I don't do CW ragchew remotely as Internet latency can be an issue but since most of my CW Q's are call:report TU:73 and those are recorded in memories, there is no reason I can't DX on CW while away. I've done digital modes remotely but mostly I just use the remote ability to chat with the local folks, while I'm away. They can't tell if I'm local or gone unless there is wimpy internet (or d-d-d-d-igital-l-l-l-l artifacts) at my remote location. I don't use VOX when the internet bandwidth is thin. So I can be having a lazy morning in bed, be on a beach, in a forest or a desert watching the sun rise having my morning coffee while chatting with the folks on the morning net(s) or 6M repeater via a Bluetooth headset to my iPhone (even on 4G) or laptop (or use regular headsets into the remote laptop). So far, I've operated remotely from Hawaii, Alaska, the Yukon, BC, most of the Western States and all over CA. Yah, the folks at home get jealous; that's just icing on my travel cake. ;o) While there are other ways to go remote, most of this was 'free' (since I owned it or it WAS free software) and it is pretty darned cool stuff; sometimes being a nerd is pretty awesome. Merry Christmas, Rick wa6nhc -----Original Message----- From: David Pratt; W0WFH Bill On 18 Dec 2013 06:40, W0WFH Bill <[email protected]> wrote > > Please respond to me off forum. [email protected] > Please reply on here; I would be interested too. 73 de David G4DMP David Pratt ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
