On Dec 27, 2013, at 10:00 AM, [email protected] wrote: > Still no luck at all. The two jumpers are set as follows:
First, stick with it, once you get it working you will LOVE the mkII, its a great in interface! Joe has always given me excellent help with my issues. I first used my mkII with an ic-7000 with few issues. When I moved up to the k3 I experienced the exact same problem as you (no output, period). After 30 minutes of futzing around it magically started to work. Unfortunately I never figured out exactly what I did to make the difference... I suggest you concentrate on one path, either digital/DM780 or voice, then tackle the other. Voice might be easiest first, it sounds like you are 1 step from success there. I never use voice, but I suspect your mike routing is incorrect. Plug your heil mic into the mkII front panel mic jack (lower left corner). Then play with all 3 settings of the router "Audio Settings Tab", "Microphone Selection" to see if any is a winning combination. "Auto" should work. mkII is probably selecting the front mic, but that jack is currently empty (ie, currently plugged into the k3, not the mkII). One issue that plagued me in the beginning (ie with the 7000) was that the identifies for the codecs kept changing under my feet. I was misconfiguring something at the windows level and the name would change from "microHAM CODEC" to "1-microHAM CODEC", then "2-microHAM CODEC", etc. every time I replugged the USB cable. Be sure windows current id, ie the one mkII router is using, matches the one used by DM780. Steve AD0ES ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
