Thanks for the info all - I looked at that Bird 6 position switch - about 1/2 the cost of my KX3 - yikes! Think I'll pass on that one. I do have a Daiwa 2 position switch that I've hooked up to share my antenna - one side to the K3, the other to the KX3. Seems to work OK, although when a strong signal (S9+) on the K3, I can still hear it when the switch is set to the KX3. I wonder if the Alpha/Delta switches have any better isolation that thiat
Jim / W6JHB On Tuesday, Dec 31, 2013, at Tuesday, 12:38 PM, Edward R Cole wrote: > I am using a couple DAIWA manual coax switches. 2-pos selects either K3/10 > or KX3 (at 12w) and 4-pos is for antenna selection at 300w from the > amplifier. I do not use coax switches at QRO levels but I only run that on > 6m and 2m with dedicated antenna so no switching is needed (I do use coax > relays). > > I am getting a used B&W 5-pos switch which will be used at HF/6m under 300w. > I have to check it out first. > > 73, Ed - KL7UW > http://www.kl7uw.com > "Kits made by KL7UW" > Dubus Mag business: > [email protected] > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
