I have this happen occasionally, but only when I am transmitting with the KPA500. In RX and barefoot, it's solid. I'm going to try some additional snap-on ferrite chokes on the lines, etc.
- 73 de Mike, K6MKF, W6NAG, Secretary - NCDXC, IDXG, RRC #933, K3-P3-KPA500-KAT500 Addict, Maui -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of George Thornton Sent: Friday, January 03, 2014 8:57 AM To: [email protected] Subject: Re: [Elecraft] P3 svga hangs I have the following setup: K3 (with two receivers) P3 with SVGA Steppir 3 element Yagi External monitor attached to P3 I am having problems with the P3 SVGA being sluggish and periodically locking up. Sometimes the external monitor locks up, sometimes both. I can usually get it running by turning the P3 off and on. This happens fairly frequently and can be quite annoying. The impression is the P3 SVGA is overloaded and can't keep up. The software is all up to date. Everything else seems to be working just fine. Any help would be appreciated. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
