Be aware that You operate CW on the K3 and KX3 using an app called K3iNetwork made by Mike KS7D. I have used it extensively over the last 18 months. Right now actually using it from EA8 :-) Mike is working on another app which uses the touch screen as a touch paddle. It still not working too well but I think it will be improved soon. 73 de OZ4UN Poul-Erik
Sendt fra min iPad > Den 06/01/2014 kl. 07.30 skrev "Rick Bates" <happymooseph...@gmail.com>: > > DM780 does indeed allow CW (KY Cmd), which should work on the KX3 as well as > it does on the K3. It does this through the serial port, which also manages > the PTT, no further hardware needed unless you want it to decode for you as > well. ;0) > > Rick wa6nhc > > -----Original Message----- > From: Don Wilhelm > > The KX3 can be keyed using the "KY" command, but I do not think > HRD/DM780 implements that command - few applications do. > The easiest solution is to use the K1EL Winkeyer. > HRD/DM780 can also send CW using a serial port, but that is a different > port than is used for rig control, and you need something like the 'one > transistor keying interface' to make the RS-232 signal levels into > on-off switching needed to key the rig. > > 73, > Don W3FPR > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
